Engine Ezrun 3652 4000Kv G2

EZRUN 3652 G2 - black

High torque:
The 4-pole design ensures that the motor produces a large amount of torque, has a much faster response to acceleration and very stable power for the drive train.

Speed ​​continuity:
The first motor to adopt an innovative 4-pole magnet with an 8-part rotor, creating a "stepped magnet" (Hobbywing-patented design in the RC field), which has an extremely low "toothed" effect and low torque pulsation (which is thanks to this reduced by 85% compared to conventional 1 / 10th 4-pole motors).

Motor thermal protection:
When pairing the EzRun 3652/3660 G2 with the Hobbywing EzRun MAX10-SCT or MAX10 ESC, the built-in temperature sensor and sensor port (for connection to ESC) will allow the motor thermal protection to be available against damage due to overheating during maximum load.

Excellent construction:
The O-ring seal mounted between the motor face and the motor cover insulates the screw holes from the inside, thus preventing liquid or dust from entering and thus protecting the motor from damage. The special design protects the inner coils of the motor from damage by too long screws when mounting the motor front.

High efficiency:
HobbyWing's temperature control technology has been designed to protect the motor from thermal damage and also to operate the motor more efficiently depending on its lower temperature. The output power of this motor has an efficiency of more than 90% compared to the world's leading motor manufacturers in the RC world.

Quality materials and excellent design:
The use of double insulated windings (up to 240 ° C), high-strength adhesive (up to 340 ℃), Japanese bearings and silicon-coated steel sheets guarantees users excellent performance and super durability. The hub design of the front and rear end bells reduces engine weight.

Compatible (with EZRUN MAX10-SCT / MAX10 ESC):
By pairing the G2 engine EzRun 3652/3660 with the Hobbwing EzRun MAX10-SCT / MAX10 ESC, an excellent match between the ESC and the engine is achieved, which has a great influence on the torque and very smooth and linear performance of the whole assembly.

Engine parameters 4000Kv:

• Diameter [mm] - 36
• Length [mm] - 52
• Weight [g] - 216
• Shaft diameter [mm] - 3.17
• Speed ​​per Volt [rpm / V] - 4000
• No-load current [A] - 5.2
• Li-Pol [Art.] - 2 - 3
• Internal resistance [mOhm] - 7.4
• Timing [°] - 0